AudioCodes MediaPack MP-40 series User Manual Download Page 144

Page: 144 / 180

MediaPack BRI Series

User's Manual

144

Document #: LTRT-83702

6.5 Software

Upgrade

The

Software Upgrade

menu enables you to upgrade the MediaPack software by loading

a new image file to the gateway using TFTP.

To upgrade the MediaPack software:

Terminate all traffic on the MediaPack.

Open the ‘Software Upgrade' screen (

Software Upgrade

menu >

Software

Upgrade

Figure

6-33: Software Upgrade Screen

In the 'TFTP server IP Address' field, enter the IP address of the TFTP server on
which the image file is located.

In the 'Image File Name' field, enter the file name and the path to the folder in which
the upgrade script file (mp40x_sip_2_0_xx_yyyyy) is located on the server.

Click the

Start Software Upgrade

button, and then wait until the upgrade process has

complete.

The MediaPack will restart itself automatically when the upgrade process is complete.

Summary of Contents for MediaPack MP-40 series





















































































































































































Search results

Summary of Contents for MediaPack MP-40 series

Reviews:

Related manuals for MediaPack MP-40 series

Brands by name

Popular brands

AudioCodes MediaPack MP-40 series, User Manual

Search results

Summary of Contents for MediaPack MP-40 series

Reviews:

Related manuals for MediaPack MP-40 series

Brands by name

Popular brands