AudioCodes MediaPack MP-40 series, User Manual

Page: 145 / 180

User's Manual 6. Configuring the MediaPack
Version 2.2 145 July 2007
Table 6-26: Software Upgrade CLI Parameters
Parameter Description
copy tftp Loads the new software using TFTP to the MediaPack.
The format is:
copy tftp ://<IP address of your TFTP server>/<name of the directory in which
the new SW files are located> / <name of the download script>
Using CLI
To upgrade the MediaPack software via CLI:
1. Open a CLI session using Telnet or a serial connection.
2. Log on to the system. Default username and password: user=”Admin”; password=”Admin”.
3. Type the
enable
command to acquire administrative privileges.
4. Change the "execution" mode to “configuration”.
5. Use the following command: copy tftp
For example: copy tftp ://10.33.2.2/mp40x_sip_2_0_17_9328/mp40x_sip_2_0_17_9328 flash.
To activate the new version (after the SW version download process completes), reset the MediaPack .
To view the downloaded SW version (after the gateway is reset), use the command show version .
Note: An upgrade procedure can only be performed in execution mode with administrative privileges.