volatile memory and will be cleared when the meter is turned off, or
when the MIN/MAX is turned on, or after a remote interface reset. The
meter beeps every time when it captures a new minimum or
maximum.
How to use Min/Max
You can use the Min/Max feature either through the front panel
operation or the remote interface operation.
Front Panel Operation
First of all, you select the measurement function you wish to use, and
then press MIN/MAX button to enable the Min/Max function. To read
the min/max value, the average value or the readings count, you can
press CONFIG button and then MIN/MAX button. Use
◁
and
▷
buttons
to switch between those values. The locations of the buttons are
shown with red rectangle frames in
Figure 4-16
.
※
Note: Press MIN/MAX again to disable this feature. The “MATH”
anunnciator on the display indicates the state of a mathematical
feature.
Figure 4-16
Remote Interface Operation
The following commands show you how to use the Min/Max operation
from your PC terminal.
84
