1
10
Slow 5 ½ digits
On
5 ½
6 ½
1
10
Fast 6 ½ digits
On
6 ½
6 ½
10
10
Slow 6 ½ digits
On
6 ½
6 ½
※
Note: To change resolution, refer to Section 4.1.3: Resolution
Setting in this chapter.
Figure 4-1
Remote Interface Operation
To set Auto Zero through the remote interface, use the following
commands:
SENSe:ZERO:AUTO {OFF|ONCE|ON}
The OFF and ONCE parameters have a similar effect. Auto Zero OFF
doesn’t issue a new offset measurement. However, Auto Zero ONCE
issues an immediate offset measurement.
4.1.2 Filter
Filter is used to remove noises in measurement readings. ATM3500A
is equipped with two types of filters: AC filter and digital filter. AC filter
is for AC measurements only. It also affects the speed of the
53
