Figure 4-26
Remote Interface Operation
The following commands show how to control the display as well as
how to send a message to the display:
DISPlay {OFF|ON}
(
turns off or turns on the display
)
DISPlay:TEXT <quoted string
>
(displays the string you type in)
DISPlay:TEXT:CLEar
(clears the message displayed)
4.4.2 Beeper
ATM3500A multimeter beeps when some certain conditions are met or
when an error occurs. But there may be time you want to disable the
beeper for some operations. Although you can turn off the beeper, the
click sound you hear when a button is pressed will not be disabled. The
beeper state is stored in a volatile memory and the default will be
restored when the meter has been turned off or after a remote
interface reset.
By disabling the beeper you will not hear the meter beeps
when
:
a new minimum or maximum is found in Min/Max operation
.
a stable reading is detected and held
.
the test voltage is within the limits in diode testing
.
99
