(Refer to 4.1.2.1) or skip this step if default is to be used.
4
Press DCV or ACV button for DC or AC voltage measuring.
5
6
Select the auto-range function by pressing AUTO button on the
front panel or use
△ ▽
buttons to select desired range.
7
Connect test leads to your source signal and observe the reading
shown on the display. If the input signal is beyond the allowed
range, an overflow message “OVLD” will be displayed.
Figure 3-1
Figure 3-2
※
Note: The rear panel terminals can also be used via the same
procedures as the front panel terminals. (Refer to Figure 3.3)
34
1
2
3
4
6
2
1
3
4
5
5
6
