as shown in
Figure
3-12
.
3
Configure the thermocouple type and unit using SHIFT +
TEMP, such as K TYPE and ºC. When ready, press ENTER button.
4
Press SHIFT + TEMP buttons.
5
Take the reading on the display.
Figure 3-12
3.7.2 RTD Measurements
There are three kinds of temperature measurements with RTDs: 2-
wire, 3-wire and 4-wire measurements. You will find connection
instructions and measuring procedures in the following sections.
3.7.2.1 2-Wire RTD Measurements
How to measure temperature with 2-Wire RTD
The following
Figure 3-13
shows theory diagram of 2-Wire RTD
measurement.
1
Use terminals switch to select front terminals.
2
Insert a specified adapter into the front terminals. Connect the low
44
3
5
4
1
2