ATIKA ASP 10 TS-2, Original Instructions Manual

Page: 20 / 184

20
6. Pour in the new hydraulic oil (Quantity, see “Technical
Data”) using a clean funnel.
7. Clean the dipstick and the oil seal.
8. Check the oil seal and replace it if it is damaged in any way.
9. Replace the dipstick into the oil reservoir.
10. After an oil change, let the splitting blade move up and
down several times without load.
Dispose of the old oil properly (local oil disposal point).
The old oil must not be poured into the ground or drainage
system, or mixed with other waste.
Hydraulic oil

We recommend the following hydraulic oils for the hydrau-
lic cylinder:

Shell Tellus T 22

Aral Vitam Gf 22

BP Energol HLP 22

order no. 400142 (1 litre)

Mobil DTE 11

or equivalent
Do not use any other types of oil. The use of any other
type of oil will adversely affect the operation of the hydrau-
lic cylinder.
Transport instructions
Before each transport

Move the splitting blade up

Switch off device.

Close the oil cap.

Pull out power plug

Remove the split wood

Loosen the locking pin (A) and fix the transport support
wheel (7) in position C for transport.

Grasp the handle and carefully tilt the firewood splitter to-
wards you.
If necessary, swivel the transport drawbar down.

Now you can easily transport the firewood splitter.

Use the lifting point (A) provide for transport with a
crane.

Secure the device against tipping over or sliding away when
transporting it by crane.

When transporting the unit in a car put it on a separate
loading area.
While doing so, secure the log splitter at the points
provided with straps.
Storage
Before each storage

Move the splitting blade up

Switch off device.

Close the oil cap

Pull out power plug
Store machines that are not in use in a dry locked place pro-
tected against frost and outside the reach of children and unau-
thorized persons.
Before extended storage, please observe the following to in-
crease the service life of the device and to ensure smooth
operation:
 Thoroughly clean the device.
 Check the device for damaged or worn parts.
Guarantee
Please observe the enclosed terms of guarantee.