AT&T Synapse SB67020 User Manual Download Page 12 | Manualshive

Page: 12 / 175

background image

Overview

12

Synapse SB67020/SB67025 Deskset User’s Guide

Back to Contents

Modes of Operation

The system administrator can configure the Synapse system to operate in one of two
different modes: Call Appearance mode and Line Appearance mode. Desksets operate
differently in each mode. The appearance mode affects how you make, answer, and
manage calls. Each mode provides a unique set of configurable features. This User’s
Guide includes information about, and procedures for, both Call Appearance mode and
Line Appearance mode.

You know your Deskset is in Call Appearance mode when the Idle screen displays

New

Missed Calls

as shown in Figure 4. The Idle screen appears when the Deskset is first

turned on and when there is no call activity. In Line Appearance mode, the Deskset does
not display missed calls.

Figure 4. Idle Screen in Call Appearance mode

Call Appearance Mode

In Call Appearance mode, the system administrator can configure your Deskset with up
to 10 virtual “lines” on which you can make and receive calls. These lines are called Call
Appearances in this User’s Guide. You can use Call Appearances for calls to and from
external numbers (232-555-0176, for example) or other Synapse Deskset extensions
(Extension 220, for example). You can access each Call Appearance by pressing a
programmable feature key as shown in

Figure 2 on page 10

. By default, the top two

programmable feature keys on the SB67020/025 Deskset are Call Appearance keys.

Line Appearance Mode

In Line Appearance mode, each line also corresponds to a programmable feature key on
the Deskset. These are called Line Appearance keys in this User’s Guide. Unlike Call
Appearance mode, each Line Appearance key represents an actual physical line
connected to the PSTN Gateway (the Synapse system can have up to four PSTN Gateways
providing up to 16 lines). The system administrator can configure your Deskset with up
to 9 lines on which you can make and receive external calls. One programmable feature
key is reserved for “Intercom” calls to other Synapse Deskset extensions.

Other Desksets in the system share these lines and display the line status. Incoming calls
on a line ring at all Desksets that share that line. The Line Appearance key LED indicates
whether a line is ringing, busy, or on hold.

Wed Sep 08 11:09AM
John Smith             EXT 219
3 New  Missed Calls
2 New  Messages

Message Status

Number of new,

unreviewed voice

messages.

Your Extension

Number

Extension numbers

may be 3 or 4 digits.

Date and Time
Extension Name

Name assigned to

this Deskset

New Missed Calls

Number of new calls whose

call information has not been

reviewed. (Call Appearance

mode only)

«
...
10
11
12
13
14
...
»

Summary of Contents for Synapse SB67020
















































































































































































Reviews:

No comments

Related manuals for Synapse SB67020

Brand: NEC Pages: 2

Brand: NEC Pages: 4

OfficeServ WIP-5000M

Brand: Samsung Pages: 108

OfficeServ ITP-5107S

Brand: Samsung Pages: 40

Brand: Pantech Pages: 97

Brand: Pantech Pages: 52

Brand: Pantech Pages: 2

Brand: Uniden Pages: 24

Brand: Kyocera Pages: 56

Brand: Olitech Pages: 12

Brand: M4 Pages: 19

Brand: HME Pages: 2

Brand: Grandstream Networks Pages: 12

Brand: Polycom Pages: 9

Brand: Evolveo Pages: 23

Brand: NAM system Pages: 17

Moment SPH-M900

Brand: Samsung Pages: 122

My Shot SCH-r430 series

Brand: Samsung Pages: 142

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands