manualshive.com logo in svg

AT&T Synapse SB67020, User Manual

Share
Download
AT&T Synapse SB67020 User Manual Download Page 43

Incoming Calls

43

  

  

  

Synapse SB67020/SB67025 Deskset User’s Guide

Back to Contents

Auto Answering

You can set your Deskset to answer calls automatically, without your having to touch the 
phone to answer. See 

“Automatic Answering” on page 111

. When you enable Auto 

Answer, 

ANS

 appears at the top of the Deskset screen as shown in Figure 17 unless 

DND

 

and 

FWD

 are active, since Auto Answer is disabled when they are on.

In Line Appearance mode, you can enable Auto Answer for Intercom (extension to 
extension) calls only.

Figure 17.  Auto Answer Enabled

To respond to an Auto Answered call:

In Idle mode, all incoming calls ring for the amount of time specified in the Auto Answer 
Delay. See 

“Automatic Answering” on page 111

. After the last ring, a two-second 

notification screen appears, and you hear a warning tone.

Talk after the tone.

If you do not want the Deskset to automatically answer the call, you can press 

IGNORE

 

to send the call to the Call Forward–No Answer target. See 

“Call Forward All and Call 

Forward–No Answer” on page 109

. In Call Appearance mode, you can press 

 to 

send the call to voicemail immediately.

If there are multiple incoming calls, Auto Answer applies to the first (oldest) incoming 
call. Subsequent incoming calls are handled according to the Call Forward–No Answer 
setting.

Auto Answer does not apply to Ring Group calls.

Wed Sep 08 11:09AM
John Smith                    EXT 219
  3 New  Missed Calls
  2 New  Messages

ANS

0:05
Graham  Bell
9-800-216-2007

Transfer

Conf

Park

1

AA

Call Answ ered.

Speak after the tone.

If the Auto Answer Delay is set to zero, you hear no ring. Instead, the 

Call 

Answered

 screen appears and you hear the warning tone.

FwdVM

Summary of Contents for Synapse SB67020
















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands