manualshive.com logo in svg

AT&T Synapse SB67020, User Manual

Share
Download
AT&T Synapse SB67020 User Manual Download Page 49

Call Management

49

  

  

  

Synapse SB67020/SB67025 Deskset User’s Guide

Back to Contents

Putting a Call on Hold in Line Appearance Mode

In Line Appearance mode, all Desksets that share assigned lines can view held calls and 
take calls off hold.

To hold calls and manage held calls:

1. When you are on an active call, press 

HOLD

.

The Held Call icon 

 appears and the Line Appearance LED flashes green.

On other Desksets that are assigned that line, the Line Appearance LED flashes 
orange. Someone at any other Deskset assigned that line can press the flashing 
orange Line Appearance key to take the call off hold, making it an active call on 
their Deskset.

All Desksets, including those that are not assigned that line, can view and take 
your call off hold from the Held Calls list. See 

“Accessing the Held Calls List” on 

page 65

.

When you put an Intercom call on hold, only you can take the call off hold.

When a call is on hold, you can use the programmable feature keys or the 
Deskset Menu to access other functions.

After the call has been on hold for a delay period set by your system 
administrator (the default setting is three minutes), the Deskset rings to remind 
you that the call is still on hold.

2. To take the call off hold, press 

SELECT

 or press the Line Appearance key for that call.

Summary of Contents for Synapse SB67020
















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands