AT&T Synapse SB67020 User Manual Download Page 90

Page: 90 / 175

Call Log

Synapse SB67020/SB67025 Deskset User’s Guide

Back to Contents

Using the Call Log

The Call Log soft keys, as shown in Figure 30 and described in Table 17, are available
whenever the Call Log has at least one entry.

Figure 30. Call Log Functions

The voicemail message icon

appears in call entries where the caller left a message.

The icon remains until you delete the message. An

icon indicates the message is new.

If your company has caller ID, the caller information appears. If the caller ID information
is absent because it is unavailable,

UNKNOWN NAME

and

UNKNOWN NUMBER

appear. If the caller chooses not to send the information,

PRIVATE NAME

and

PRIVATE

NUMBER

appear.

1. Name and number

The Ring Group name can also appear here.

2. NEW

Indicates call was not answered and has not

been reviewed.

3. Voicemail message available for

playback.

Exclamation mark (!) indicates message is new.
A Ring Group or Call Queue icon can also appear

here. The voicemail icon replaces other icons

when both would apply.

4. Current Call Log entry number/

total number of entries

50/50 maximum.

Table 17. Call Log Soft keys

Key

Description

Key

Description

Plays message. Appears only
when there is a message.

Deletes the entry.

Dials the entry.

Stores number in your
Personal list.

Clears

[NEW]

indication from

the displayed entry.

Deletes all entries.

PlayMsg

Delete

CallBack

Store

ClrNew

DelAll

Summary of Contents for Synapse SB67020
















































































































































































Search results

Summary of Contents for Synapse SB67020

Reviews:

Related manuals for Synapse SB67020

Brands by name

Popular brands

AT&T Synapse SB67020, User Manual

Search results

Summary of Contents for Synapse SB67020

Reviews:

Related manuals for Synapse SB67020

Brands by name

Popular brands