AT&T Synapse SB67020 User Manual Download Page 98

Page: 98 / 175

Paging

Synapse SB67020/SB67025 Deskset User’s Guide

Back to Contents

Multi-Zone Overhead Paging

If your Synapse system includes an optional multi-zone overhead paging (OHP) system,
you have an

Overhead Paging

option in the Paging Zones list.

To page using an optional multi-zone overhead paging system:

1. Lift the handset or press

SPEAKER

, and then press

Call Appearance mode —

Press

MENU

, then

, and then

Line Appearance mode —

Press

MENU

, then

, and then

The

Paging Zones

screen appears.

2. Highlight

Overhead Paging

3. Press

SELECT

4. If more than one multi-zone OHP system is available, highlight the Analog Terminal

Adapter (ATA) to which the desired OHP system is connected, and then press

SELECT

. For more information, see your system administrator. See also

“Synapse

System Overview” on page 9

5. The multi-zone

Overhead Page

screen appears. If necessary, enter the desired

overhead Paging Zone number.

6. Wait for feedback from your paging system, then speak into the speakerphone or

pick up the corded handset to speak.

7. When finished, press

, hang up the handset, or press

SPEAKER

. The Idle

screen appears.

Page

EndPage

Summary of Contents for Synapse SB67020
















































































































































































Search results

Summary of Contents for Synapse SB67020

Reviews:

Related manuals for Synapse SB67020

Brands by name

Popular brands

AT&T Synapse SB67020, User Manual

Search results

Summary of Contents for Synapse SB67020

Reviews:

Related manuals for Synapse SB67020

Brands by name

Popular brands