manualshive.com logo in svg

AT&T Synapse SB67020, User Manual

Share
Download
AT&T Synapse SB67020 User Manual Download Page 101

Deskset Settings

101

  

  

  

Synapse SB67020/SB67025 Deskset User’s Guide

Back to Contents

Features

Use the 

Features 

menu to access the Deskset Features. Table 18 lists the Features 

available in Call Appearance mode. For Features available in Line Appearance mode, see 
Table 19 on page 102.

Figure 31.  Deskset Features Menu (Call Appearance Mode)

Table 18.  Deskset Menu 

–

 Call Appearance Mode Features

Feature

See page...

Description

1.

 

Call Queue

59

View and answer unanswered calls in the Call 
Queue.

2.

 

Park List

60

View and retrieve Parked calls.

3.

 

Page

96

Make an announcement to your organization.

4. Messages

78

Play, delete, or forward messages.

5. Do Not Disturb

128

Turn Do Not Disturb on and off.

6. Call Forward All

41

Turn Call Forward All on and off.

7. Directory

67

View and make calls from the Directory.

8. Call Log

90

View and make calls from the Call Log.

9. Redial

62

View the last 20 numbers dialed and redial a 
selected number.

0. Help

22

View help information on the Deskset screen.

Features Menu 1/4

Features Menu 2/4

Features Menu 3/4

Features Menu 4/4

Depending on how your system administrator set up your extension, some of 
these features may be available by pressing one of the programmable feature 
keys on the right side of the Deskset. See 

“Programmable Feature Keys” on 

page 19

.

Summary of Contents for Synapse SB67020
















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands