manualshive.com logo in svg

AT&T Synapse SB67020, User Manual

Share
Download
AT&T Synapse SB67020 User Manual Download Page 92

Call Log

92

  

  

  

Synapse SB67020/SB67025 Deskset User’s Guide

Back to Contents

Listening to Voicemail From the Call Log

If the caller left a message, you can play the message from the Call Log.

To play a message from the Call Log:

1. On the Call Log screen, press 

 or 

 until the desired entry is on the screen. 

2. Press 

 . The message playback screen appears.

If necessary, use the dial pad to enter your password and press 

SELECT

.

3. Press 

Delete

 while the message is playing to delete the voice message. There is a 

slight delay until the message indicators change.

4. When the message playback completes, the 

Call Log

 appears.

5. Press 

CANCEL

 to exit the 

Call Log

.

PlayMsg

Graham  Bell 

05:10

Pause

Delete

!

Jul 19   1:18p      

     

 only appears if the call has an associated voicemail.

PlayMsg

Summary of Contents for Synapse SB67020
















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands