AT&T Synapse SB67020 User Manual Download Page 115

Page: 115 / 175

Deskset Settings

115

Synapse SB67020/SB67025 Deskset User’s Guide

Back to Contents

Sounds

Use the

Sounds

menu to set the ring volume, delay the beginning of audible ringing,

pick one of nine ringtones, or turn key beeps and the call waiting tone on and off.

To use the Sounds

menu:

1. Press

MENU

, then

, and then

The

Sounds

menu appears.

2. Press





to adjust the

Ring Volume

from

. The default is

. A ringer

sample plays. You can also set the ring volume by pressing

VOL+

and

VOL–

To turn off the ringer, decrease the volume to zero.

Call Appearance mode —

Press



, and then





to set the

Ring Delay

from

seconds. The default is

, which also disables the feature. Although the Call

Appearance or Line Appearance LED flashes, the Deskset does not ring for the time
you set.

4. Press



, and then





to select one of nine

Ringtones

. The default is

Ringtone samples play when selected.

5. Press



, and then





to turn

Key Beeps

Off

. The default is

6. Press



, and then





to turn

Call Waiting Tone On

Off

. The default is

The call waiting tone alerts you to an incoming call if you are already on a call. This
setting does not control any call waiting alert(s) provided by your telephone service.

7. Press

to accept the adjustments and return to the

Deskset Settings

menu.

Save

Summary of Contents for Synapse SB67020
















































































































































































Search results

Summary of Contents for Synapse SB67020

Reviews:

Related manuals for Synapse SB67020

Brands by name

Popular brands

AT&T Synapse SB67020, User Manual

Search results

Summary of Contents for Synapse SB67020

Reviews:

Related manuals for Synapse SB67020

Brands by name

Popular brands