AT&T 6386 WGS, Installation And Maintenance Manual

Page: 93 / 213

10
Type y and press [Enter].
11
12
13
The following messages appear:
Building speech Filesystem on slice 0s4.
Inittab successfully rebuilt.
Voice System successfully installed.
Installing the IVP4 driver.
The following messages appear:
The UNIX® Operating System will now be rebuilt.
This will take approximately 2 minutes. Please wait.
The UNIX Kernel has been rebuilt.
Take out the last diskette when complete.
When the installation is complete, the IVP System Software package is
installed, but not running.
The system will prompt you for a shutdown. Press [Enter] to shut down
the system.
When prompted, press [Ctrl]-[Alt]-[Del] to reboot the system.
Installing AVP Application Software
Loading the AUDIX Voice Power Application software takes approximately
15 minutes to complete. The number of diskettes in the application
software set depends on the diskette size being used.
Prior to AUDIX Voice Power Application software installation, the “audix”
login should have been created for the AUDIX System Administrator.
To
1
2
install the AUDIX Voice Power Application software, follow these steps:
Login as root (if not already logged in).
Insert diskette 1 of the AUDIX Voice Power application into the floppy
disk drive.
3 At the # prompt, type installpkg and press [Enter].
A confirmation message appears on the screen. You are then prompted
to insert the next diskette into the floppy disk drive.
Software Installation
3-17