AT&T 6386 WGS, Installation And Maintenance Manual

Page: 142 / 213

System Message Listings
The messages are arranged in numerical order by msg_ids. They are
organized in subgroups according to the software process that outputs the
message. Each message appears in bold type.
Following each message is a short explanation of the message and the
recommended corrective action. The same explanation appears when you
use the explain command.
If no corrective action is provided, the message is
either informational or is corrected automatically by the Voice Power
System.
Some of the corrective actions must be performed by the System Manager or
a field service representative. These messages are identified whenever
possible.
When a corrective action requires you to contact AT&T, you will, in most
cases, need to talk to a software support individual because there may be a
problem. with the software or the way you have your system set up. If a
corrective action requires you to shut down, restart, diagnose the system,
etc., refer to the procedures provided in other sections of this guide.
A-8 APPENDIX: System Messages