AT&T 6386 WGS, Installation And Maintenance Manual

Page: 68 / 213

Setting Up a Report Printer
The AT&T 470/47 1, 570/571, and 580/581 printers are supported.
This section describes the setup of the AT&T 570 (80 column) or 571
(132 column) printer. For other printers, please refer to the documentation
received with the printer.
The switches and lamps have different meanings in Setup Mode than they do
in Normal Print Mode. The printer operation panel is shown in Figure 2-40
with the setup functions identified.
FIGURE 2-40 printer Operation Panel
In the Setup Mode, the switches have the following functions:
Set Up Function
When pressed while turning power ON, causes the
printer to enter Setup Mode. (The printer will be in
Function Mode with function 01 selected. Also pressing
[scroll down] when power is turned on causes the printer to
be in Function Mode with function 99 selected.)
When pressed while in Function Mode, causes the
printer to return to Normal Print Mode.
When pressed while in Menu Mode, causes the printer
to store the selected value for the selected function.
Menu When pressed, causes the printer to enter Menu Mode
for the function selected.
2-54 Hardware Installation and Maintenance