AT&T 6386 WGS, Installation And Maintenance Manual

Page: 145 / 213

405 (TSM_NOSLOT), MAJOR
TSM: No Slot Available for Script <string>
•
Contact the NSSC or NSAC for assistance.
406 (TSM_NOSCRIPT), MAJOR
TSM: Cannot Find Script <string>; errno = <integer>
TSM failed to open the specified script file. This occurs if the script
file does not exist. The value of the errno indicates the cause
of the error.
•
Ensure that the script file (.T file) is in directory /vs/trans.
•
Script needs to be assigned.
•
Look up the value of errno in Intro(2), Introduction to Section 2
in the UNIX Programmer Reference Manual.
407 (TSM_BADSCRIPT), MAJOR
TSM: Script <string> has Bad Format
The format of the script file (.T file) is invalid. This can occur if the
file is not the output of the tas assembler.
•
Ensure that the script file (.T file) is the output of the tas
assembler.
•
Reload the application software if error persists.
408
(TSM_SCRD), MAJOR
TSM: Read Error on Script < string>
A read error occurred while TSM was reading the script file
from disk.
•
Hang up the telephone and try again several times.
•
You have UNIX system disk problems. Reboot the system, then
reload the software.
APPENDIX: System Messages
A-11