AT&T 6386 WGS, Installation And Maintenance Manual

Page: 83 / 213

10
11
12
13
14
Type 4 for Exit (Update the Disk Configuration and Exit) and press
[Enter].
The system displays the following message:
Hard disk partitioning complete.
A surface analysis wil now be done.
This will destroy all data on the hard disk.
Strike ENTER to continue or DEL to abort.
Press [Enter].
The surface analysis takes 10 to 60 minutes to complete depending on
the size of the disk.
The system then displays the default Filesystem assignments. They will
vary from system to system. The system prompts you to confirm that the
default assignments are acceptable.
Type n and press [Enter].
The system prompts you to indicate whether you want separate/root and
/usr filesystems.
Type y and press [Enter].
The system prompts you to indicate whether you want additional
/usr2 Filesystem.
Type y and press [Enter].
The system displays the following:
Do you want to allocate a crash/dump area on your disk? If
you do not, the swap/paging area will be used to save the
memory image in the event of a system panic (y/n)?
Software Installation 3-7