Asus Z87M-PLUS User Manual Download Page 85

Page: 85 / 164

ASUS Z87M-PLUS

3-27

Chapter 3

Active Memory Threshold [0]

This item supports Intel Rapid Storage Technology when the partition size

is greater than the Active Page Threshold size. When set to zero (0), it will

go to Auto mode and checks if the partition size is enough at S3 entry.

Ensure that the caching partition size is larger than the total memory size.

Hybrid Hard Disk Support [Disabled]

Allows you to enable or disable the hybrid hard disk support. Configuration options:

[Enabled] [Disabled]

Intel Smart Connect Technology
ISCT Support [Disabled]

Allow you to enable or disable the Intel

Smart Connect Technology. Configuration options:

[Enabled] [Disabled]

3.6.3

SATA Configuration

While entering Setup, the BIOS automatically detects the presence of SATA devices. The

SATA Port items show

Empty

if no SATA device is installed to the corresponding SATA port.

Scroll down to display the other BIOS items.

Summary of Contents for Z87M-PLUS





































































































































































Search results

Summary of Contents for Z87M-PLUS

Reviews:

Related manuals for Z87M-PLUS

Brands by name

Popular brands

Asus Z87M-PLUS, User Manual

Search results

Summary of Contents for Z87M-PLUS

Reviews:

Related manuals for Z87M-PLUS

Brands by name

Popular brands