Asus Z87M-PLUS User Manual Download Page 149

Page: 149 / 164

ASUS Z87M-PLUS

6-9

Chapter 6

Battery mode

Intel

Rapid Start Technology

Timer and slider

In the Intel

Rapid Start Technology, you may do any the following:

a. In Status field, click

to enable or click

Off

to disable Intel

Rapid Start

Technology.

b. In Critical Battery field, this function only applies to notebooks. This function

activates the notebook’s battery saving mode

c. In Timer field, click

to enable the timer then move the slider to the desired time

to activate Intel

Rapid Storage Technology.

Click

Save

Intel

Rapid Start Technology Manager

Using the Intel

Rapid Start Technology

To use Intel

Rapid Start Technology:

On the task bar, click

to show hidden icons then click

Intel

Rapid Start Technology

icon.

Summary of Contents for Z87M-PLUS





































































































































































Search results

Summary of Contents for Z87M-PLUS

Reviews:

Related manuals for Z87M-PLUS

Brands by name

Popular brands

Asus Z87M-PLUS, User Manual

Search results

Summary of Contents for Z87M-PLUS

Reviews:

Related manuals for Z87M-PLUS

Brands by name

Popular brands