Asus Z87M-PLUS User Manual Download Page 128

Page: 128 / 164

4-12

Chapter 4: Software support

Chapter 4

4.3.7

ASUS Update

ASUS Update is a utility that allows you to manage, save, and update the motherboard BIOS

in Windows

environment.

Launching ASUS Update

To launch ASUS Update, click

on the top edge of the screen, then click

ASUS Update

on the AI Suite 3 main menu bar.

Using ASUS Update

Select any of these options to update the BIOS:

•

Update BIOS from Internet

Allows you to download the latest BIOS version from the ASUS website at www.asus.

com and follow the onscreen instructions to update the BIOS.

•

Download BIOS from Internet

Download the latest BIOS version from the ASUS website at www.asus.com and save

it for later use.

•

Update BIOS from file

Use the BIOS file that you had downloaded and saved to update the system BIOS.

Summary of Contents for Z87M-PLUS





































































































































































Search results

Summary of Contents for Z87M-PLUS

Reviews:

Related manuals for Z87M-PLUS

Brands by name

Popular brands

Asus Z87M-PLUS, User Manual

Search results

Summary of Contents for Z87M-PLUS

Reviews:

Related manuals for Z87M-PLUS

Brands by name

Popular brands