Asus Z87M-PLUS User Manual Download Page 141

Page: 141 / 164

ASUS Z87M-PLUS

6-1

Chapter 6

Intel

technologies

Intel

2013 Desktop Responsiveness Technologies

This section details the overview of the installation and configuration procedures of the Intel

2013 Desktop Responsiveness Technologies.
Intel

2013 Desktop Responsiveness Technologies consists of three powerful technologies

that helps your system boost its speed, responsiveness and overall performance.
Below are the features of Intel

2013 Desktop Responsiveness Technologies:

•

Intel

Smart Response Technology

•

Intel

Rapid Start Technology

•

Intel

Smart Connect Technology

Chapter 6:

Intel® technologies

System Requirements

In order for the system to run smoothly for the Intel

2013 Desktop Responsiveness

Technologies, your system must meet the following requirements.

CPU:

4th generation Intel

Core™ processor family

OS:

Windows

7 / Windows

8 operating systems

SSD:

One dedicated SSD (Solid State Disk) to support Intel

Smart Response and

Intel

Rapid Start Technology.

Refer to the

SSD Capacity Requirements

table for the information of SSD size,

partition capacity and system memory requirements.

HDD:

At least one HDD (Hard Disk Drive) for the system OS drive.

DRAM:

To enable Intel

Rapid Start Technology, 8GB or less system memory is

required.

•

Ensure that you use an unpartitioned SSD to enable the Intel

Smart Response

Technology.

•

If you choose GPT (GUID Partition Table) store type for your operating system,

ensure to reserve an unallocated space of 5MB for the Intel

Smart Response

Technology.

Summary of Contents for Z87M-PLUS





































































































































































Search results

Summary of Contents for Z87M-PLUS

Reviews:

Related manuals for Z87M-PLUS

Brands by name

Popular brands

Asus Z87M-PLUS, User Manual

Search results

Summary of Contents for Z87M-PLUS

Reviews:

Related manuals for Z87M-PLUS

Brands by name

Popular brands