Asus Z87M-PLUS User Manual Download Page 111

Page: 111 / 164

ASUS Z87M-PLUS

3-53

Chapter 3

3.11.2 ASUS EZ Flash 2

ASUS EZ Flash 2 allows you to update the BIOS without having to use a bootable floppy disk

or an OS-based utility.

Before you start using this utility, download the latest BIOS from the ASUS website

at www.asus.com.

To update the BIOS using EZ Flash 2:

Insert the USB flash disk that contains the latest BIOS file to the USB port.

Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select

ASUS EZ Flash Utility and press <Enter> to enable it.

Press <Tab> to switch to the Drive field.

Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS,

and then press <Enter>.

Press <Tab> to switch to the Folder Info field.

Press the Up/Down arrow keys to find the BIOS file, and then press <Enter> to perform

the BIOS update process. Reboot the system when the update process is done.

Summary of Contents for Z87M-PLUS





































































































































































Search results

Summary of Contents for Z87M-PLUS

Reviews:

Related manuals for Z87M-PLUS

Brands by name

Popular brands

Asus Z87M-PLUS, User Manual

Search results

Summary of Contents for Z87M-PLUS

Reviews:

Related manuals for Z87M-PLUS

Brands by name

Popular brands