background image

ASUS Z87M-PLUS

3-41

Chapter 3

PS/2 Keyboard and Mouse Support [Auto]

Select any of these settings when PS/2 keyboard and mouse are installed. These 

settings only apply when Fast Boot is enabled.

[Auto] 

 For a faster POST time, PS/2 devices will only be available when 

the system boots up or rebooted when the PS/2 devices have not 

been reconnected or changed. If you disconnect or change PS/2 

devices before restarting the system, PS/2 devices will not be 

available and BIOS setup program will not be accessible via PS/2 

devices.

[Full Initialization]   For full system control, PS/2 devices will be available during 

POST at any circumstances. This process will extend POST time.

[Disabled] 

 For the fastest POST time, all PS/2 devices will not be available 

until your computer enters the operating system.

Network Stack Driver Support [Disabled]

[Disabled] 

Select to skip the network stack driver from loading during POST.

[Enabled] 

Select to load the network stack driver during POST.

Next Boot after AC Power Loss [Normal Boot]

[Normal Boot]  Returns to normal boot on the next boot after an AC power loss.
[Fast Boot] 

Accelerates the boot speed on the next boot after an AC power loss.

Boot Logo Display [Enabled]

[Enabled] 

Enables the full screen boot logo display during POST.

[Disabled] 

Disables the full screen boot logo display during POST.

The following items appear only when you set the Boot Logo Display to [

Enabled

].

Boot Logo Size Control [Auto]

[Auto] 

 Automatically adjusts for Windows

®

 requirements.

[Full Screen] 

Maximizes the boot logo size.

Post Delay Time [3 sec]

This item appears only when you set the Boot Logo Display item to [Enabled]. This 

item allows you to select a desired additional POST waiting time to easily enter the 

BIOS Setup. You can only execute the POST delay time during normal boot. The 

values range from 0 to 10 seconds.

This feature will only work when set under normal boot.

The following items appear only when you set the Boot Logo Display to [

Disabled

].

Post Report [5 sec]

This item allows you to select a desired POST report waiting time. Configuration 

options: [1 sec] - [10 sec] [Until Press ESC]

Summary of Contents for Z87M-PLUS





































































































































































Reviews: