ASTRO VG-876 Instruction Manual Download Page 93

Page: 93 / 543

Chapter 4

PATTERN SETTINGS

4.9.6. Output setting of BMP files

In the Image Pattern, not only VGD file (original file format of ASTRO VG), Windows BMP files can be output,too.

However, there are regulations written below.

(1) 8bit (256 colors) or 24bit (16.77 million colors) image.

(2) The image file that is recorded by bottom-up (writing from left-bottom to right-top).

(biHeight of the header information is positive number.)

(3) Uncompressed file (biCompression of the header infiormation is BI_RGB.)

<File nane>

The file name should be like « bitmap001.bmp » , « bitmap002.bmp ». « 001 » or « 002 » part are designated

number from 001 to 999. Then, save it in « bmp4 » folder of USB memory.

USB Memory

├

bmp4 (folder)

│ ├

bitmap001.bmp

│ ├

bitmap002.bmp

│ ├

bitmap003.bmp

│ ├

bitmap003.vgd *

│ ├

bitmap004.vgd

│ ├

bitmap005(TestImage01_1920x1080_24bit).bmp

│ ├

bitmap006(TestImage02_1920x1080_24bit).vgd *

│ ├

bitmapname003.vgd *

│ ├

bitmapname004.vgd *

├

prg4 (folder)

├

grp4 (folder)

├

opt4 (folder)

*1 If it has same file name of both VGD and BMP extention, the VGD file has

priority to output.

Caution

注意

・

The recordable BMP file resolution is up to 8k x64k.

・

64pcs of 4Kx2K BMP pictures can be read.

Caution

注意

Summary of Contents for VG-876
































































































































































































































































































































































































































































































































































Search results

Summary of Contents for VG-876

Reviews:

Related manuals for VG-876

Brands by name

Popular brands

ASTRO VG-876, Instruction Manual

Search results

Summary of Contents for VG-876

Reviews:

Related manuals for VG-876

Brands by name

Popular brands