515
12
LIST OF ERROR MESSAGES
12.1. Media-related error
Code (HEX) Error message
Description
217
Flash ROM(User) Full
There is not enough free space in the internal memory.
228
No USB Memory
The USB Memory has not been inserted.
229
USB Memory Unformatted
The USB Memory has not been formatted.
22A
USB Memory Full
There is not enough free space on the USB Memory.
22C
OPT Data File Error
Error in the optional pattern data.
22F
Image Data File Error
Error in the image data.
233
Audio Flash Data Already Exist
The audio data has already been registered.
235
Audio Flash File Error
Error in the audio data.
236
Audio Flash Data Full
The maximum amount of audio data which can be registered has
been exceeded.
12.2. General error
Code (HEX) Error message
Description
302
‘H-Timing DotClock’ Over Limit
Dot clock in the horizontal timing data is outside the setting range.
303
‘H-Timing Frontp’ Over Limit
Frontp in the horizontal timing data is outside the setting range.
305
‘H-Timing HD’ Over Limit
Hdwidth in the horizontal timing data is outside the setting
range.
307
‘H-Timing Period’ Over Limit
Period in the horizontal timing data is outside the setting range.
308
‘H-Timing Disp’ Over Limit
Disp in the horizontal timing data is outside the setting range.
309
‘H-Timing Sync’ Over Limit
Sync in the horizontal timing data is outside the setting range.
30A
‘H-Timing Backp’ Over Limit
Backp in the horizontal timing data is outside the setting range.
30B
‘H-Timing Blanking’ Over Limit
Blanking in the horizontal timing data is outside the setting range.
30C
H-Frequency Over Limit
The horizontal sync frequency in the horizontal timing data is outside
the setting range.
30D
‘H-Timing’ Data Error
Error other than those described above in the horizontal timing data.
310
‘Output’ Data Error”
Error in the output condition data.
311
‘Character’ Data Error”
Error in the character pattern data.
312
‘Cross Hatch’ Data Error”
Error in the crosshatch pattern data.
313
‘Dot’ Data Error”
Error in the dot pattern data.
314
‘Circle’ Data Error”
Error in the circle pattern data.
Summary of Contents for VG-876
