ASTRO VG-876, Instruction Manual

Page: 78 / 543

64
<Table of checkerboard setting items>
(1) DOTxDOT H/V <Valid only when DOT×DOT is selected as the Type setting>
Set the number of horizontal (H) and vertical (V) pixels for one color.
Setting range: 1 to 8
(2)
BLOCKxBLOCK H/V <Valid only when BLOCK×BLOCK is selected as the Type setting>
Set the number of horizontal (H) and vertical (V) blocks.
Setting range: 2 to 32
(3) Sub Pixel H/V <Valid only when Sub Pixel is selected as the Type setting>
Set the number of horizontal (H) sub pixels and number of vertical (V) pixels.
Setting range: 0 to 3
* When
RGB 0%/100% is selected for Color Select, H=1 and V=1 will be
set regardless of the settings.
Setting example: H=2, V=3
(4) SubPixel Offset H/V <Valid only when Sub Pixel is selected as the Type setting>
Set the number of sub pixels at the top left in the horizontal (H) direction and
the number of pixels at the very top in the vertical (V) direction. (The
Sub
Pixel H and V settings subsequently apply.)
Setting range: 0 to 2
* When RGB 0%/100% is selected for Color Select, H=0 and V=0 will be
set regardless of the settings.
Setting example: Sub Pixel H=3, V=1, SubPixel Offset H/V = refer to figures.
(5) Color Select (0/1) This sets the color and level.
0 RGB 0%/100% 0% / 100%
1
User Color
The colors selected using User Color 1 and 2
are used.
2 2
3
3
Offset H=0 / V=0
H=2 (/V=0)
H=1 (/V=0)
V=2 (/H=0)
When User Color has been
selected
: User Color 1 is used.
: User Color 2 is used.