ASTRO VG-876, Instruction Manual

Page: 540 / 543

526
2.10 2014/10/17
4.13.6 Correct list of HDMI List example.
4.13 Add SCDC to NAME/LIST.
4.13.1 SCDC and SCDC(HEX) is added to Type of Name/List.
Yes 4.13.11 Add SCDC pattern.
10.6.2 Add HEX setting to SDI Payload setting.
2.20 2014/11/7
Yes 10.1.7 Add
“VM-1876-MX”
Yes 10.8 Add description for operating by 4 units synchronization.
Yes 10.9.8 Add description of Synchronizing unit.
10.6.2 Add description of setting parameter of SDI Payload.
10.7.1 Add description of SDI output of Int.L-PCM setting parameter.
2.30 2014/12/5
10.6.2
Description of “Audio Copy” is added.
10.6.5 In SD Clock Delay, description that SD output cannot use it is added.
10.6.6 Only L-PCM 48KHz is available for audio output.
10.7.1 Regulation of DisplayPort is deleted.
10.9.3 Channel number of DisplayPort is changed to 8ch.
10.9.5 Correct regulation of SDI output.
10.13.2 Delete notice of timing edit of DisplayPort is deleted.
2.40 2015/1/9
4.5.1 Add regulation of output timing of SDI CheckField.
4.13.1
Add description of display of output BIT in NAME pattern.
4.13.2
4.13.5 Add description of AV Mute Mode of HDCP pattern.
6.2.1 Add caution of HDCP2.2 execution.
2.50 2015/04/16
4.13.5 Change from HDCP1.0, 1.1/1.2 to 1.4.
6.1
Add Auth Version in HDCP setting item.
Change “Version” to “AV-
Mute Mode”.
6.2.1 Add Auth Version in HDCP Program execution.
10.1.7 Add description of VM-1876-M8. VM-1876-MX is moved to 10.1.8.
10.2.5 Add description of 21:9 setting method.
10.3.3 Add Scramble setting of ON and Refer EDID in HDMI unit setting.
10.3.5 Add ON and Refer EDID.
10.6.4 Add description that Time code is not output in SD timing.
10.8 Change from 4 units to several units.
10.8.3 Add description of setting method of VM-1876-MX.
10.8.5 Add split image.
10.8.6 Add scanning direction image.
10.9.2
10.9.6
10.9.7
Change E-EDID version to 1.4.
10.9.8 Add HDMI 6G HDCP2.2 unit.
12.2
Add Lane division of V-by-One Mode3 of dual clock.
Change to
“from 2048” in Lane5-8 in V-by-one Mode 8,9 in dual clock.
2.60 2015/4/14
10.3.3
10.3.5
Add
description that the settings of “ON” and “Refer EDID” of Scramble
setting are available only for VM-1876-M8.
10.3.4
Add “Dynamic Range and Mastering InfoFrame” in the
InfoFrame/Packet.
10.3.13
Add explanation of “HPD Negate”.
10.8.4
Add “V2Div” in the Multi VGSplit.
10.8.5 Change title of split image as 4 sets synchronization.