ASTRO VG-876 Instruction Manual Download Page 396

Page: 396 / 543

382

<SDI unit parameter setting.>

(1)

Output OFF/ON

Port1 to 16 (0/1)

This sets On or Off for each channel.

These are the same settings as in

“10.2.1

Output interface ON/OFF

setting”.

OFF

No output

Output

Below setting is available only for the setting “Refer Program” in SDI Payload setting- Mode.

(2)

SDI Format (0-4)

This sets the SDI format.

SD-SDI

HD-SDI

3G-A

3G-SDI. Level.A

3G-B

3G-SDI. Level.B

HD Dual

HD Dual-Link

(3)

Video Format (0-2)

This sets the color space of the images which are output from SDI.

RGB

RGB

YcbCr4:4:4

YcbCr4:4:4

YcbCr4:2:2

YcbCr4:2:2

(4)

Width(0-2)

This sets the output image bit length. A setting which is the

independent of the pattern drawing bit length can be selected or the

same bit length as the pattern drawing bit length can be selected

automatically.

Note) the portion of the pattern drawing bit length which exceeds the

bit length set here is discarded. A deficient portion is filled with zeros.

Auto

Either 10 bits or 12 bits are selected

automatically in accordance with the pattern

drawing bit length.

10bit

10-bit output

12bit

12-biy output

(5)

Split Count(0-2)

This sets how many splits are applied.

Note) it follows the setting of Dotclk Mode that was set in

“

10.2.4

Dot Clock operation mode

”

No Split

No split

2 Split(not

use)

2 split (not supported by SDI)

4 Split

4 split

(6)

Split Mode(0-A)

Set split mode

Note)

It follows the setting of Split Mode that is set in “10.2.4 Dot

clock operation mode

– DotClk Mode setting”

This is displayed only for 4 split.

4Square

Square division split

reserved1

This is not supported by SDI.

reserved2

This is not supported by SDI.

reserved3

This is not supported by SDI.

reserved4

This is not supported by SDI.

reserved5

This is not supported by SDI.

reserved6

This is not supported by SDI.

reserved7

This is not supported by SDI.

reserved8

This is not supported by SDI.

reserved9

This is not supported by SDI.

Summary of Contents for VG-876
































































































































































































































































































































































































































































































































































Search results

Summary of Contents for VG-876

Reviews:

ASTRO VG-876, Instruction Manual, Page: 396 / 543

Search results

Summary of Contents for VG-876

Reviews: