ASTRO VG-876 Instruction Manual Download Page 111

Page: 111 / 543

Chapter 4

PATTERN SETTINGS

<Example of what is displayed>

<Table of cursor setting items>

(1)

Format (0-3)

The shape of the cursor is set here.

5 × 5 Cross

The cursor is displayed as a 5-pixel × 5-pixel
cross.

HV-Line

The cursor is displayed as a cross whose
horizontal and vertical dimensions extend to the
edges of the screen.

V-Line

The cursor is displayed as a vertical line.

Dot

The cursor is displayed as a 1-pixel × 1-pixel.

(2)

Step

The amount of cursor movement when the cursor is to be moved is set here.

0 to 2

1 dot/10
dot/100 dot

(3)

Coordinate

The coordinate display method is set here.

OFF

No coordinates are displayed.

Normal-1

The horizontal and vertical coordinates and step
are displayed in 1-pixel increments.

Normal-2

The horizontal and vertical coordinates are
displayed in sub-pixel increments, and the step
is displayed in 1-pixel increments.

Reverse-1

Normal-1 is inverted at the top and bottom, and
displayed.

Reverse-2

Normal-2 is inverted at the top and bottom, and
displayed.

#1(GATE=541 :STEP10)
(R=2881 G=2882 B=2883)

Cursor 1

Cursor 2

Coordinates of target cursor (#1 = cursor 1, #2 = cursor 2 when Cursor 2 is ON)

Summary of Contents for VG-876
































































































































































































































































































































































































































































































































































Search results

Summary of Contents for VG-876

Reviews:

ASTRO VG-876, Instruction Manual, Page: 111 / 543

Search results

Summary of Contents for VG-876

Reviews: