264
Vendor Specific InfoFrame
The vendor specific information is stored in Vendor Specific InfoFrame, and sent.
(1)
OFF/ON (0/1)
This setting determines whether Vendor Specific InfoFrame is to be sent.
0
OFF
The Vendor Specific InfoFrame is not sent.
1
ON
The Vendor Specific InfoFrame is sent.
Listed below are the Vendor Specific InfoFrame settings.
* These settings are not related to the video and audio output settings.
(2)
Type
This is the Vendor Specific InfoFrame type setting.
1 *
“Type” is displayed only. It cannot be changed.
(3)
Version
This is the Vendor Specific InfoFrame version setting.
1 *
“Version” is displayed only. It cannot be changed.
(4)
IEEE RegID Sel (0-2)
This selects the format setting for the IEEE Registration ID and the items
after it.
0
Other
Any IEEE Registration ID can be selected.
The Payload is set after the IEEE Registration
ID.
1
H14b
The IEEE Registration ID is set to 000C03.
After the IEEE Registration ID, the setting is
established using the format that supports HDMI 1.4.
2
HF-VSIF
The IEEE Registration ID is set to C45DD8h.
After the IEEE Registration ID, the setting is
established using the format that supports HDMI 2.0.
1. IEEE RegID Sel: Other
1-(1)
IEEE Regist. ID
This is the IEEE Registration ID setting.
000000h
– FFFFFFh
1-(2)
Payload Length
This is the Payload length setting.
0
– 24
1-(3)
Payload 1-24
This is the Payload data setting.
00h
– FFh
2. IEEE RegID Sel: H14b
2-(1)
IEEE Regist. ID
This indicates the IEEE Registration ID. (It cannot be changed.)
000C03h
2-(2)
Video Format (0-2)
This is the HDMI Video Format setting.
0
None
No additional HDMI video format is presented in
this packet.
1
Ext. Resolution
Extended resolution format present.
2
3D
3D format indication present.
2-1. Video Format: Ext. Resolution
2-1-(1)
HDMI VIC (0-3)
This is the HDMI VIC setting.
0
4K×2K 29.97/30 Hz
1
4K×2K 25 Hz
2
4K×2K 23.98/24 Hz
3
4K×2K 24 Hz (SMPTE)
Summary of Contents for VG-876
