ASTRO VG-876 Instruction Manual Download

Page: 166 / 543

152

<Table of LipSync setting items>

(1)

OFF/ON(0/1)

Whether to set the

lip sync

function on or off is set here.

OFF

Disabled

Enabled

(2)

Mode(0/1)

The method used to set the delay amount (time) is set here.

0 Delay

The delay amount of the user’s choice is set.

1 EDID

The delay amount accords with the EDID of the
connection destination. (Automatically set)

(3)

When Delay has been
selected as the Mode
setting
Audio Delay Time

The delay amount is set here as a time.

Sign

: Indicates behind or ahead.

The audio is behind the video.

‐

The audio is ahead of the video.

Time: The time is set here.

When EDID has been
selected as the Mode
setting
EDID Port

The port used to read the EDID is set here.
Operation is initiated using the amount of delay defined in the EDID
concerned.

～

HDMI1

～

The EDID is read from the port set here.

(4)

On Time

The audio output time and raster (white) display time are set using the
vertical sync signal (in 1-frame increments).

Setting range: 1 V to 255 V

(5)

OFF Time

The audio no output time and display OFF (black) time are set using the
vertical sync signal (in 1-frame increments).

Setting range: 1 V to 255 V

Sign

Time

Summary of Contents for VG-876
































































































































































































































































































































































































































































































































































Search results

Summary of Contents for VG-876

Reviews:

Related manuals for VG-876

Brands by name

Popular brands

ASTRO VG-876, Instruction Manual

Search results

Summary of Contents for VG-876

Reviews:

Related manuals for VG-876

Brands by name

Popular brands