ASTRO VG-876 Instruction Manual Download Page 112

Page: 112 / 543

(4)

Blink (0-7)

Whether the cursor is to blink and the blink interval are set here.

None

The cursor does not blink.

1 to 7

1 V /2 V /4 V
/8 V /16 V /32
V /64 V

The cursor blinks for each 1 V (vertical sync
period) to 64 V and then goes off, and this is
repeated.

(5)

Sub Pixel (0/1)

Whether the cursor is to be moved in 1-pixel increments or sub-pixel
increments is set here.
[Operation in sub-pixel increments]

OFF

The cursor is moved in 1-pixel increments.

The cursor is moved in sub-pixel increments.

(6)

Overlay (0/1)

Whether the cursor is to be displayed on top of the test pattern or on top of
the background color set using the Color Back R G B item is set here.

OFF

The cursor is displayed on top of the
background color set by the Color Back R G B
item.

The cursor is displayed on top of the test
pattern.

(7)

Intersection (0/1)

The shape of the intersection is set here.

Normal

The intersection is filled in as a cross.

Space

The cursor is not displayed in the pixels of the
intersection and sub-pixels below it, but the
original background is displayed instead.

(8)

Cursor 2 (0/1)

The display of the second cursor (cursor 2) is set here.

OFF

The cursor is not displayed.

The cursor is displayed.

(9)

Color Cursor 1 R G B

The cursor 1 color and level are set here.
The setting range differs depending on the color
depth.

Setting ranges by
color depth

8 BIT

0 to 255

9 BIT

0 to 511

10 BIT

0 to 1023

11 BIT

0 to 2047

12 BIT

0 to 4095

13 BIT

0 to 8191

14 BIT

0 to 16383

15 BIT

0 to 32767

16 BIT

0 to 65535

(10)

Color Cursor 2 R, G, B

The cursor 2 color and level are set here.
The setting procedure is the same as for the

Color Cursor 1 R G B

item.

(11)

Color Back R G B

The background color and level are set here. However, when

has been

selected as the

Overlay

item setting, the test pattern becomes the

background so that this setting is canceled.
The setting procedure is the same as for the

Color Cursor 1 R G B

item.

⇀

↽

⇀

↽

⇀

↽

⇀

↽

⇀

↽

Right

⇀

↽

Left

Summary of Contents for VG-876
































































































































































































































































































































































































































































































































































Search results

Summary of Contents for VG-876

Reviews:

Related manuals for VG-876

Brands by name

Popular brands

ASTRO VG-876, Instruction Manual

Search results

Summary of Contents for VG-876

Reviews:

Related manuals for VG-876

Brands by name

Popular brands