ASTRO VG-876 Instruction Manual Download

Page: 520 / 543

506

<Table of teletext setting items>

(1)

Mode(0-2)

The Teletext operation mode is selected here.

OFF

Teletext OFF.

Default

The default pages are output.
For further details, refer to the teletext
default on next pages

Page Select

The pages selected by

page

in (2) below is

output here.

(2)

Page

Press

display

the

setting

menu.

This generator enables up to 20 pages of teletext screens to be registered.

Numbers for the internal data are set on each page.
100-899 can be set as page data.

(3)

Line

The lines in which the Teletext data is to be output are set here.

The figure indicates the line numbers in the first field and second field.

8,321

Disable

The data is not output in line 8 and line
321.

Enable

The data is output in line 8 and line 321.

9,322

Same setting as above.

10,323

Same setting as above.

・

22,335

Same setting as above.

Summary of Contents for VG-876
































































































































































































































































































































































































































































































































































Search results

Summary of Contents for VG-876

Reviews:

Related manuals for VG-876

Brands by name

Popular brands

ASTRO VG-876, Instruction Manual

Search results

Summary of Contents for VG-876

Reviews:

Related manuals for VG-876

Brands by name

Popular brands