Home
/
ASTRO
/
VG-876
/
Instruction Manual

ASTRO VG-876, Instruction Manual, Page: 260 / 543

Share

Page: 260 / 543

ASTRO VG-876 Instruction Manual Download Page 260

246

10.2.10. Setting the audio level (temporary settings)

In this section, the audio output level is set.

The level which was set in “10.2.9 Setting the audio level (temporary settings)” for analog audio or which was set
using <Internal PCM setting parameters> in “10.3.5 Embedded audio, high bit rate audio (option)” for HDMI is 0 dB.

Press [LEVEL]

→ [3] → [3]. (PAGE: 3/3)

Set the audio level using [Rotary switch] or [INC]/[DEC] key and then press [SET] key.
Alternatively, set the audio level using the number keys [0/STATUS] to [9/F], and then press [SET] key.

<When increasing the setting speed>

While holding [SHIFT] key pressed, press [Rotary switch] or [INC]/[DEC] key.

When [LEVEL] key or [ESC] key is pressed, the display returns to the initial screen.

• The values set here are not saved as program data.
• When they are used with HDMI, select

Internal PCM

as the

Digital Audio >

Source

setting.

CAUTION

«
...
258
259
260
261
262
...
»

Summary of Contents for VG-876
































































































































































































































































































































































































































































































































































Reviews:

No comments