ASTRO VG-876 Instruction Manual Download

Page: 118 / 543

104

<Table of name setting items>

(1)

Format (0-3)

The display contents of Name are set here.

Program Name

The program names are displayed.

Pattern Name

The pattern names are displayed.

Program & Pattern
Name

The program names and pattern names are
displayed at the same time.

Program Name, Freq

The program names and video timing signal
frequencies are displayed at the same time.

(2)

Position(0-6)

The display position of the name is set here.

Center

The name is displayed at the screen center.

Top-Left

The name is displayed at the top left of the
screen.

Bottom-Left

The name is displayed at the bottom left of the
screen.

Top-Right

The name is displayed at the top right of the
screen.

Bottom-Right

The name is displayed at the bottom right of the
screen.

Top-Center

The name is displayed at the upper center of
the screen.

Bottom Center

The name is displayed at the lower center of the
screen.

(3)

Font(0-2)

The font size is set here.

5 × 7

5 × 7 is set as the font size.

7 × 9

7 × 9 is set as the font size.

16 × 16

16 × 16 is set as the font size.

32 x 32

32 x 32 is set as the font size.

64 x 64

64 x 64 is set as the font size.

(4)

Overscan [%]

The display position can be adjusted in such a way that the display is not
hidden to simulate an overscanning monitor.

H =

Set the horizontal overscanning ratio.

V =

Set the vertical overscanning ratio.

(5)

Pattern Name

The pattern names are edited here.
For details on the editing procedure, refer to “2.3 Setting the names.”

Note)

the output bit is displayed as below:

when HDMI/DP/SDI/V-by-One HS interface unit was installed in VG-876:

Color Depth

HDMI I/F:8bit



Interface unit name (HDMI), output bit

DP I/F:8bit



Interface unit name (DP), output bit

SDI I/F:8bit



Interface unit name (SDI), output bit

VbyOne I/F:8bit



Interface unit name (VbyOne), output bit

Reference) about output bit

Output bit is decided by below parameter and its priority.

1st priority: setting of Config - Color Depth.

2nd priority: setting of Digital Output - Color Depth (only HDMI / DP / SDI has this setting.)

3rd priority:

setting of All Output - Color Depth

Summary of Contents for VG-876
































































































































































































































































































































































































































































































































































Search results

Summary of Contents for VG-876

Reviews:

Related manuals for VG-876

Brands by name

Popular brands

ASTRO VG-876, Instruction Manual

Search results

Summary of Contents for VG-876

Reviews:

Related manuals for VG-876

Brands by name

Popular brands