IP Routing Configuration Example
Sample Pipeline configuration data
B-2
Preliminary January 30, 1998
Pipeline Start Here Guide
Sample ISDN information
When your ISDN line is installed, you will be given a document that should list
the switch type and your directory numbers. If your service is installed in North
America, the service profile identifiers (SPIDs) associated with your service. The
following sample data is similar to what you get when your ISDN line is
installed. The sample values are used in the QuickStart and Configure menu
examples (by line #) to help you identify where to enter your information.
Sample remote network information
When you set up an account with an ISP or any remote network, you need the
type of information listed below. The sample values are used in the QuickStart
and Configure menu examples (by line #) to help you enter your information.
#
ISDN information
Sample values
6
Switch type
DMS-100 NI1
7
Directory number for B1
8005551111
8
Directory number for B2
8005551112
9
SPID for B1
800555111101
10 SPID for B2
800555111202
#
ISP or Remote network Sample values
11 Account name
outpost1
12 Account password
abquoo33
13 IP addresses
Dynamically assigned at logon. (Use NAT.)
14 Remote gateway name
bignet-gate
15 Remote IP address
206.100.10.1
16 Remote subnet address
/32 or 255.255.255.255
17 Remote dial-up number
17005553333
18 Authentication method
PAP
