Installing the Pipeline
Installation steps
2-12
Preliminary January 30, 1998
Pipeline Start Here Guide
Figure 2-6. Connecting an S-interface Pipeline to the ISDN line
What’s next?
•
If you’re using a single computer with the Pipeline, skip to “Connecting the
Ethernet” on page 2-12.
•
If you’re connecting a network of computers to the Pipeline, skip to
“Connecting to a network” on page 2-13.
Connecting the Ethernet
To connect a single computer with a 10Base-T Ethernet interface to the Pipeline,
use the 10Base-T cable included with the Pipeline. For a Pipeline 50 or 75, use
the crossover cable, part number 2510-0084-001. For a Pipeline 85, use the
straight-through cable, part number 2510-0064-001.
1
Insert one end of the 10Base-T cable into the 10BT jack on the back of the
Pipeline. Attach to any of the four Ethernet ports on the Pipeline 85.
2
Insert the other end of the cable into the 10Base-T Ethernet jack on the
computer.
