Using the On-board Software
Menus and status windows
Pipeline Start Here Guide
Preliminary January 30, 1998
5-5
The Configure menu is discussed in “Entering a basic configuration” on page 5-
7. All of the other menus and their parameters are discussed in the User’s Guide.
Additionally, every parameter in the menu system is listed in alphabetical order
in the Parameter Reference chapter of the Reference Guide.
Opening a menu
To open a menu, select it by placing the cursor (>) in front of the item and
pressing Enter. To move the cursor down, press Ctrl-N (next) or the Down-Arrow
key. To move it up, press Ctrl-P (previous) or the Up-Arrow key. (Note that some
VT100 emulators do not support the use of arrow keys.)
Main Edit Menu
>Configure...
00-000 System
20-000 Ethernet
30-000 Serial WAN
40-000 Dual POTS
SNMP Traps
Specifies where to send SNMP traps packets.
IPX Routes
Defines up to two IPX servers.
IPX SAP Filters
Defines input and output SAP filters.
NAT
Sets up how you obtain a dynamic IP address.
Mod Config
A number of global Ethernet interface settings.
Serial WAN
Mod Config
Specific to the interface software loaded on the
model. The Serial WAN menu item is present, but
not enabled on the Pipeline 50, 75, and 85.
Dual POTS
Enables or disables voice features on units with
enabled POTS ports.
Table 5-1. The Main Edit Menu structure (continued)
Menu
Submenu
Description
