Installing the Pipeline
Installation steps
2-14
Preliminary January 30, 1998
Pipeline Start Here Guide
cable is only for connecting the Pipeline 50 or 75 directly to a computer, as
described in “Connecting the Ethernet” on page 2-12.
2
Insert the other end of the cable into an unused port on the 10Base-T hub.
Figure 2-8. Inserting the 10Base-T cable into the hub
!
Caution:
When connecting a Pipeline 85 in a hub-to-hub configuration, be sure
to check your other hub’s documentation to see what type of cable is required to
connect the two hubs together.
What’s next?
Skip to “Connecting to the Terminal port” on page 2-17.
Connecting to a Thinnet network
To connect the Pipeline to a Thinnet (10Base-2) network:
1
Connect a Thicknet-to-Thinnet transceiver to the Pipeline AUI jack.
