Figure 2-17. Connecting the telephone cable to a telephone
2
Connect the other end of the cable to the Phone 1 port on the Pipeline.
Figure 2-18. Connecting the telephone cable to the Pipeline Phone 1 port
Note:
Although you’ve connected a phone, you won’t get a dial tone when you
pick up the receiver until you connect the power supply for the Pipeline as
described later in this chapter.
3
Connect one end of another modular telephone hookup cable to a fax
machine or other telephone device.
Note:
If your ISDN service is AT&T Custom Point-to-Point, you can receive
incoming calls only on the Phone 1 port. If you have this service, connect all
telephone equipment to the Phone 1 port using a line splitter or other device.
