Installing the Pipeline
Installation steps
Pipeline Start Here Guide
Preliminary January 30, 1998
2-11
Figure 2-5. Connecting a U-interface Pipeline to the ISDN line
What’s next?
•
If you’re using a single computer with the Pipeline, skip to “Connecting the
Ethernet” on page 2-12.
•
If you’re connecting a network of computers to the Pipeline, skip to
“Connecting to a network” on page 2-13.
Connecting an S-interface Pipeline
To connect a Pipeline with an S interface to the ISDN line:
1
Insert the end of the RJ-48C to RJ-11 ISDN cable (part number 2510-0122-
001) with the larger jack into WAN jack on the back of the Pipeline.
The ends of this cable are blue.
Warning:
Do not use the 10Base-T Ethernet crossover cable (part number 2510-
0084-001) or the 10Base-T straight-through cable (part number 2510-0064-001),
included with the Pipeline to connect the Pipeline to the ISDN line. Using the
wrong cable can damage or destroy the Pipeline.
2
Insert the other end of the cable into the appropriate jack on the external
network terminator (NT-1) device for your ISDN connection. Consult your
NT-1 documentation to identify the correct jack.
3
Connect the external NT-1 to the ISDN wall jack following the directions
provided in your NT-1 documentation.
