Installing the Pipeline
Installation steps
2-20
Preliminary January 30, 1998
Pipeline Start Here Guide
Figure 2-15. Connecting an adapter to a Macintosh modem cable
2
Connect the cable to the Terminal port on the back of the Pipeline.
3
Connect the other end of the cable to a serial port (either the Modem or
Printer port) on the computer.
Figure 2-16. Connecting a Macintosh to the Pipeline Terminal port
What’s next?
•
If you are connecting telephone equipment to the Pipeline, see “Connecting
telephone equipment” on page 2-21.
•
If you are not connecting telephone equipment to the Pipeline, see “Starting
up the Pipeline” on page 2-24.
