Quick Start
Opening a configuration file from disk
4-8
Preliminary January 30, 1998
Pipeline Start Here Guide
Opening a configuration file from disk
You can load a configuration into the Pipeline from a file.
Figure 4-6. Open a Configuration File button
This button opens a find file dialog where you can select a configuration file from
disk. By selecting a file, you automatically load the configuration into the tabbed
interface console. From the console, click Update to send this configuration to a
Pipeline. The unit to which the configuration is sent is specified in the following
dialog:
Figure 4-7. Updating the Pipeline from a previously saved file
Click here
to load a
configuration
file from disk
Enter the IP address
of the recipient unit
here
