Installing the Pipeline
Pipeline components
Pipeline Start Here Guide
Preliminary January 30, 1998
2-5
Pipeline components
The Pipeline package contains the following components:
Figure 2-4. Hardware and accessories contained in the Pipeline package
•
The Pipeline.
•
An RJ-48C to RJ-11 ISDN cable (part number 2510-0122-001). The ends of
this cable are blue.
Each end of the cable has a different size modular jack. The larger jack is an
RJ-48C, which fits the WAN port on the back of the Pipeline; the smaller
jack is an RJ-11, which fits into the ISDN wall jack installed by your
telephone company.
•
A 10Base-T Ethernet crossover cable (part number 2510-0084-001)
The ends of this cable are yellow. If you are using the Pipeline with only one
computer and the computer has a 10Base-T Ethernet interface, you can use
this cable to connect the computer directly to the 10Base-T Ethernet jack on
the Pipeline, as shown later in this chapter. You cannot use this cable for any
other purpose.
A 10Base-T Ethernet straight-through cable (part number 2510-0064-001) is
shipped with Pipeline 85 units. Use this cable to connect a computer directly
to the Pipeline hub. To connect a Pipeline 85 to another hub, refer to the
other hub’s documentation for information about connecting hub-to-hub.
