Basic Configuration Settings
ISDN or Frame Relay information
Pipeline Start Here Guide
Preliminary January 30, 1998
3-3
ISDN or Frame Relay information
If you have an ISDN line, use the information that was given to you by your
telephone company to fill in the following table:
If you have a Frame Relay connection, contact your Frame Relay administrator to
obtain the switch type and a Data Link Connection Indicator (DLCI) for each
Connection profile you need to define and enter the information in the table
below:
Note:
If you have Frame Relay service, you need to configure the Pipeline using
the on-board software.
Table 3-2. ISDN line settings checklist
Required ISDN information
Your setting
Switch type
Directory number for B1
Directory number for B2
SPID for B1 (North America only)
SPID for B2 (North America only)
Table 3-3. Frame Relay connection settings checklist
Frame Relay information
Your settings
Switch type
DLCI
