Introduction to the Pipeline
Possible changes to your application settings
1-12
Preliminary January 30, 1998
Pipeline Start Here Guide
Possible changes to your application settings
When the Pipeline is ready to be put in service on your local network, you might
need to change the connection settings of applications that previously used Dial-
up Networking, such as email applications. In some cases, you might only need
to deactivate dialing, such as for your web browser.
Note:
When connecting with the Pipeline, you make network or PPP
connections; not dial-up connections.
Setup guidelines
After installing the Pipeline, fill in the checklists in Chapter 3, “Basic
Configuration Settings,” then enter your information and test your settings by
performing a test connection. If you need help resolving any installation or
connection problems, refer to the “Troubleshooting” chapter of the User’s Guide.
Sample configurations for setting up TCP/IP and for setting up your Pipeline,
using the example IP addresses discussed throughout this manual, can be found
in the appendixes.
For detailed information about any function or setting in the Pipeline, refer to the
User’s Guide and Reference Guide.
